LCR Tester

HIOKI LCR Tester

LCR meters, impedance analyzers, fixtures, and resistance systems for component and material testing.

RCC Electronics offers HIOKI LCR testers, impedance analyzers, chemical impedance analyzers, SMD and 4-terminal fixtures, DC bias units, equivalent circuit analysis firmware, electrode resistance systems, resistance meters, probes, and test leads.

Request a Quote

✓ LCR meters and impedance analyzers ✓ SMD, 4-terminal, and DC bias fixtures ✓ Resistance and electrode measurement systems

MODE: LCR / IMPEDANCE TEST
MEASURE: inductance, capacitance, resistance, impedance
WORKFLOW: lab, R&D, production, QA

1mHz–3GHzRange described across HIOKI LCR/impedance line

IM35xxLCR meters and analyzers

IM758xHigh-frequency impedance analyzers

RMResistance and electrode systems

Build the right measurement chain: instrument, fixture, lead, and software.

The RCC HIOKI LCR Tester category includes bench LCR testers, high-frequency impedance analyzers, fixtures for components and SMD devices, DC bias voltage/current units, calibration kits, equivalent circuit analysis firmware, and related resistance measurement systems.

Measure components accurately

Use LCR meters and fixtures to measure inductors, capacitors, resistors, and component impedance in lab, QA, and production environments.

Analyze impedance over frequency

HIOKI impedance analyzers support frequency-dependent analysis for electronic components, materials, and advanced device evaluation.

Match accessories to the test object

4-terminal probes, SMD fixtures, pincher probes, DC bias units, calibration kits, and test stands help complete the measurement setup.

Featured HIOKI LCR and impedance product groups.

Because this category includes many instruments and accessories, the landing page groups products by application so customers can quickly narrow the right HIOKI solution.

Bench LCR meters

IM3523 / IM3523A / IM3533 / IM3536

HIOKI LCR Tester and LCR Meter models

IM3523 and IM3533 are listed as HIOKI LCR Tester models
IM3523A is listed as a HIOKI LCR Meter
IM3536 is listed as a HIOKI LCR Meter, DC to 8 MHz
IM3536-01 is listed as a HIOKI LCR Meter, 10 MHz

Impedance analysis

IM3570 / IM3590

HIOKI impedance and chemical impedance analyzers

IM3570 is listed as a HIOKI Impedance Analyzer
IM3590 is listed as a HIOKI Chemical Impedance Analyzer
HIOKI LCR meters and impedance analyzers for a wide range of applications
IM9000 equivalent circuit analysis firmware is listed for IM3570

High-frequency impedance

IM7580A / IM7581 / IM7583 / IM7585 / IM7587

HIOKI high-frequency impedance analyzer family

IM7580A is listed for 1 MHz to 300 MHz
IM7581 is listed for 100 kHz to 300 MHz
IM7583 is listed for 1 MHz to 600 MHz
IM7585 is listed for up to 1.3 GHz; IM7587 up to 3 GHz

Fixtures and probes

9140 / 9261 / 9262 / 9263 / 9677 / IM9100 / IM9110

HIOKI LCR test fixtures and SMD fixtures

9140 and 9140-10 are listed as 4-terminal probes for LCR applications
9261 / 9261-10 are listed as test fixtures for LCR remote zero insertion
9262 is listed as a vise clamp test fixture
9263, 9677, IM9100, and IM9110 are listed as SMD test fixtures

Bias and analysis options

9268-10 / 9269-10 / IM9000

DC bias units and equivalent circuit firmware

9268-10 is listed as a DC Bias Voltage Unit for IM series LCR
9269-10 is listed as a DC Bias Current Unit for IM Series LCR
IM9000 is listed as Equivalent Circuit Analysis Firmware for IM3570
Useful for more advanced component evaluation workflows

Calibration and high-frequency accessories

IM9200 / IM9201 / IM9202 / IM9905 / IM9906

HIOKI IM758x test stand, fixtures, calibration kit, and adapters

IM9200 is listed as a test stand for IM7580X series
IM9201 is listed as an SMD test fixture for IM758X series
IM9202 is listed as a test fixture
IM9905 calibration kit and IM9906 3.5 mm to 7 mm adapter are listed for IM758X workflows

Resistance meters

RM3542 / RM3543 / RM3544 / RM3545A / RM3548

HIOKI resistance meter and micro-ohmmeter models

RM3542 series is listed as micro-ohmmeter / resistance meter models
RM3543 and RM3543-01 are listed as resistance meter options
RM3544 and RM3545A series cover bench resistance meter workflows
RM3548 is listed as a portable micro-ohmmeter with 1A output

Electrode resistance

RM2610 / RM2611 / RM2612

HIOKI electrode resistance measurement system

RM2610 KIT and RM2610 PRO KIT are listed as electrode resistance measurement system kits
RM2611 is listed as an electrode resistance meter
RM2612 is listed as resistance calculation software
Useful for battery electrode and material resistance measurement workflows

Leads and contact tips

L2000 / L2001 / L210x / IM9901 / IM9902

HIOKI four-terminal leads, pincher probes, clip leads, and tips

L2000 is listed as a four-terminal test lead for IM LCR DC to 8 MHz
L2001 is listed as a pincher probe for IM series LCR / impedance meters
L2101 to L2108 are listed as clip, pin, 4-terminal, comparator, and connection leads
IM9901 and IM9902 are listed as contact tip replacements for L2001

General meters and accessories

3030-10 / 3120 / 9418-15 / C1006

Additional instruments and support accessories listed in the category

3030-10 is listed as a HIOKI Analog Multimeter
3120 is listed as a discontinued, limited-stock non-contact voltage detector
9418-15 is listed as an AC adapter for IR3455
C1006 is listed as a carrying case for RM3548

Need help choosing?

Application Support

We can help match the instrument, fixture, and lead set

LCR meter vs. impedance analyzer selection
Frequency range, component type, and test fixture requirements
SMD, 4-terminal, DC bias, and high-frequency accessory needs
Resistance meter and electrode resistance workflow support

Workflow tip

Confirm the Full Measurement Setup

Do not select the meter alone

Confirm measurement frequency and impedance range
Match the fixture or probe to the DUT package
Check whether DC bias, calibration, or firmware is needed
Verify cable length, interface, and automation requirements

Quick comparison

Use this table as a starting point before contacting us to confirm the best HIOKI LCR / impedance / resistance configuration.

Product group	Best fit	Examples	Typical application
Bench LCR meters	General component LCR measurement	IM3523, IM3523A, IM3533, IM3536, IM3536-01	Inductance, capacitance, resistance, and impedance measurement in lab or production
Impedance analyzers	Frequency-dependent impedance evaluation	IM3570, IM3590	Component, material, chemical, and equivalent-circuit analysis workflows
High-frequency impedance analyzers	MHz to GHz impedance testing	IM7580A, IM7581, IM7583, IM7585, IM7587	High-frequency components, RF-related impedance testing, and fast automated testing
LCR fixtures and probes	Connecting the device under test	9140, 9261, 9262, 9263, 9677, IM9100, IM9110, L2000, L2001	SMD, vise clamp, remote zero, 4-terminal, and pincher-style measurements
Bias and firmware options	Advanced test conditions and analysis	9268-10, 9269-10, IM9000	DC bias voltage/current workflows and equivalent circuit analysis
Resistance meters	Low-resistance and precision resistance measurement	RM3542, RM3543, RM3544, RM3545A, RM3548	Micro-ohm, milli-ohm, bench resistance, and portable resistance measurement
Electrode resistance systems	Battery electrode and material resistance analysis	RM2610 KIT, RM2610 PRO KIT, RM2611, RM2612	Electrode resistance measurement and resistance calculation workflows
Calibration and high-frequency accessories	IM758x setup and maintenance	IM9200, IM9201, IM9202, IM9905, IM9906	High-frequency test stand, fixtures, calibration, and adapter support

Need help selecting a HIOKI LCR or impedance setup?

Share your component type, required frequency range, impedance range, fixture style, DC bias needs, automation/interface needs, and whether resistance or electrode analysis is required. We can help recommend the practical HIOKI configuration.

Request Support

Frequently asked questions

Common questions when selecting HIOKI LCR testers, impedance analyzers, and accessories

Which HIOKI products are listed as LCR testers or LCR meters?

IM3523, IM3523A, IM3533, IM3533-01, IM3536, and IM3536-01 as HIOKI LCR tester / LCR meter options.

Which products are high-frequency impedance analyzers?

IM7580A, IM7581, IM7583, IM7585, and IM7587 impedance analyzer models, including frequency ranges from 100 kHz or 1 MHz up to 300 MHz, 600 MHz, 1.3 GHz, and 3 GHz depending on model.

Which accessories are used for SMD and fixture-based measurements?

SMD and LCR fixtures including 9263, 9677, IM9100, IM9110, IM9201, and IM9202, along with 4-terminal probes, pincher probes, vise clamp fixtures, and remote-zero insertion fixtures.

Which products support DC bias or equivalent circuit analysis?

9268-10 DC Bias Voltage Unit, 9269-10 DC Bias Current Unit, and IM9000 Equivalent Circuit Analysis Firmware for IM3570.

How should I choose the right LCR measurement setup?

Start with the device under test, frequency range, impedance range, required accuracy, fixture or lead style, SMD or through-hole package, DC bias requirements, and whether automation or software analysis is needed. We can help confirm the compatible instrument and accessory set.

Turn to RCC Electronics for high-quality LCR testing equipment. Browse our selection below, or feel free to contact us with any questions.

Pre-Order

SM7860-68 - HIOKI Power Source Unit for SM7810-20 (220V)

Power Source Unit for SM7810-20 (220V)..

CAD 25,468.80

Add to Cart