3193-10 - HIOKI Power Meter (Bench Type)
Product Code: 3193-10
Availability: 2-4 Weeks
*** Click here to view manufacturer specifications ***
All products ship from Toronto, Canada by courier. Shipping is usually 1-10 days depending on your location in Canada. Shipping is free of charge. Orders received before 2:00pm (Mon-Fri) will be shipped on the same day (provided item is available in stock). You can pay with all major credit cards. On our side, we use PayPal to process all credit card transactions. But on your side, it will be like any regular purchase. You do not need to create a PayPal account. From the shopping cart, simply select "PayPal / Credit Card", then select "Pay with a credit or Visa debit card". Customer satisfaction guaranteed, or your money back. RCC Electronics is proudly Canadian. We have been selling the best test equipment since 1978. |
Wide Spectrum Power Analyzer DC - 1MHz |
A multi-function power meter for use with single phase power lines to 3-phase, 4-wire circuits. Accommodating up to 6 units, the unit is not only capable of measuring up to 6 single phase systems, but can simultaneously measure the input and output of a 3-phase inverter and provide effective power measurements. Additionally, it supports harmonic analysis and flicker measurement (optional), features which are essential for overall device assessment. |
Basic specifications |
Measurement lines | Single-phase/two-wires to three-phase/four-wires (Through the use of various input units) |
Measurement items |
(When using 9600 / 9601 / 9602, optional) Voltage, current, voltage/current peak, effective/reactive/apparent power, power factor, phase, frequency, current/power integration, load rate, efficiency (When using 9603, optional) Voltage, torque, RPM, frequency, motor output (When using 9605, optional) Harmonic, waveform, voltage fluctuation / flicker measurement functio |
Measurement ranges | Voltage: 6.0000 V to 1.0000 kV (depends on use of the input unit), Current: 200.00 mA to 500.00 A (depends on use of the input unit), Power: Depends on combination of voltage and current ranges |
Integration range | 0 to ±999999 TAh/ TWh, (integration time up to 10000 hours) |
Basic accuracy used with 9600 to 9602 Input unit |
±0.1 % rdg. ±0.1 % f.s. (voltage, current, power, at 45 to 66Hz) Note: When used together with the 9270 to 9272-10, and 9277 to 9279, resulting accuracy is the sum of that indicated above and the accuracy of these clamp-on sensors |
Frequency characteristics |
used with 9600: DC, 0.5 Hz to 1 MHz used with 9601: 5 Hz to 100 kHz used with 9602: DC, 0.5 Hz to 200 kHz (depends on the clamp-on sensor accuracy) |
Signal output | Analog level: Voltage, current, active power, 5 V DC f.s., Waveform monitor: Voltage, current, 1 V rms f.s., D/A output: Outputs 8 arbitrarily selected items, ±5 V DC f.s. |
Other functions | 6.4 inch TFT color LCD, RMS/MEAN rectification, FDD, GP-IB/RS-232C interface, scaling, averaging |
Power supply | 100/120/200/230 V AC (switched automatically), 50/60 Hz |
Dimensions, mass | 430 mm(16.93 in)W × 150 mm(5.91 in)H × 370 mm(14.57 in)D, 15 kg (529.1 oz) ...with all options |
Accessories | Power cord (1), Connector (1) |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: