3284 - HIOKI AC/DC TRMS Clampon Tester 200A

Analysis for DC to distorted waves

200 Arms, clamp aperture: 33 mm(1.30 in) dia. Inrush current crest value RMS value of full-wave rectified waveforms Waveform and harmonic analysis

Basic specifications

AC Current range	AC (RMS or Peak value)20.00 or 200.0 A AC, 2 ranges (±1.3 % rdg. ±3 dgt. at 50 or 60Hz), AC+DC (RMS or Peak value)20.00 or 200.0 A AC, 2 ranges (±1.3 % rdg. ±13 dgt. at 50 or 60Hz), Effective value rectifier
DC Current range	DC (Average or Peak value)20.00 or 200.0 A DC, 2 ranges (±1.3 % rdg. ±3 dgt.)
AC Voltage range	AC (RMS or Peak value)30.00 to 600 V AC, 3 ranges (±1.0 % rdg. ±3 dgt. at 50 or 60Hz), AC+DC (RMS or Peak value)30.00 to 600 V AC, 3 ranges (±1.0 % rdg. ±7 dgt. at 50 or 60Hz), Effective value rectifier
DC Voltage range	DC (Average or Peak value)30.00 to 600 VDC, 3 ranges (±1.0 % rdg. ±3 dgt.)
Other functions	Frequency: 10 to 1000 Hz, Mode: Max./Min./AVE./RMS Record mode/Auto-off
Analog output	DC, or AC 1 V /f.s. ,Level output: with REC mode, Waveform output: with MON mode
Frequency characteristics (at AC current / voltage)	DC, 10 to 2 kHz
Display section	Current / 2500 dgt. Voltage / 3750 dgt. Bar graph / 35 seg.
Sampling rate	2 or 4 times/sec (Slow: 1 time/3 sec)
Crest factor (RMS)	2.5 (1.7 at 600 V range), 1.5 (200 A range)
Max. circuit voltage	600 V AC rms (insulated wire)
Power supply	6F22(006P) × 1, Continuous use 25 hours, or AC adapter
Core jaw dia.	Ø 33 mm(1.30 in)
Dimensions, mass	62 mm(2.44 in)W × 230 mm(9.06 in)H × 39 mm(1.54 in)D, 460 g (16.2 oz)
Accessories	TEST LEAD 9207-10 (1), CARRYING CASE 9399 (1), Hand strap (1)

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: