MR6000-01 - HIOKI High Speed Memory Recorder

MR6000-01 - HIOKI High Speed Memory Recorder

MR6000 recorder: 200 MS/s isolated inputs, 1 G-word memory and continuous recording with no blind time. Analyze on the 12.1-inch touch screen, no PC needed.

Key Capabilities

• Operate intuitively, respond instantly.
• Capture fast events with 200MS/s isolated inputs.
• Record long tests without worry — built-in high-capacity storage.
• From real-time acquisition to post-analysis—standalone, from start to finish.

Contact RCC Electronics for Canadian availability, configuration guidance and a formal quotation.

Technical Specifications

Official HIOKI product information

Standard Accessories

• Power cord ×1, Quick start manual ×1, Operating Precautions ×1, Blank panel (for blank slots only)

Optional accessories below are not included unless stated on the RCCE quotation.

Optional Accessories

• DIGITAL VOLTMETER UNIT MR8990 — ・ For minute voltage measurement; ・ Max. 0.1 μV resolution; ・ 500 times/s sampling
• STRAIN UNIT U8969 — • 2 ch, acceleration, load, pressure or strain; • Strain gauge converter amp
• HIGH VOLTAGE UNIT U8974 — ・ 2 ch, high-voltage input; ・ Max. 1000 V DC, 700 V AC rms; ・ DC to 100 kHz bandwidth
• 4CH ANALOG UNIT U8975 — ・ 4 ch; ・ DC to 2 MHz bandwidth
• HIGH SPEED ANALOG UNIT U8976 — ・ 2 ch; ・ DC to 30 MHz bandwidth
• 3CH CURRENT UNIT U8977 — ・ 3 ch, current measurement; ・ DC to 2 MHz bandwidth
• 4CH ANALOG UNIT U8978 — ・ 4 ch instantaneous waveforms; ・ DC to 2 MHz bandwidth
• CHARGE UNIT U8979 — ・ Measure acceleration waveforms across 2 channels; ・ Charge output type acceleration pickup; ・ Preamplifier built-in acceleration pickup
• ANALOG UNIT 8966 — • 2 ch, instantaneous waveforms; • DC to 5 MHz bandwidth
• TEMP UNIT 8967 — • 2 ch, temperature; • Thermocouple input
• HIGH RESOLUTION UNIT 8968 — • 2 ch, high resolution measurement; • DC to 100 kHz bandwidth
• FREQ UNIT 8970 — • 2 ch, rotation, frequency; • DC to 100 kHz
• CURRENT UNIT 8971 — • 2 ch, measuring current; • DC to 100 kHz bandwidth; • Directly connectable with current sensors
• DC/RMS UNIT 8972 — • 2 ch, instantaneous waveform/RMS; • DC to 400 kHz bandwidth; • RMS: DC and 30 to 100 kHz
• LOGIC UNIT 8973 — • 16 ch, logic signal; • Up to four logic probes
• WAVEFORM GENERATOR UNIT MR8790 — ・1 Hz to 20 kHz sine waveform output; ・±10 V DC output; ・4 channels

Confirm compatibility and the final configuration with RCC Electronics before ordering.