IM3536 - HIOKI LCR Meter, DC to 8MHz

IM3536 - HIOKI LCR Meter, DC to 8MHz

HIOKI LCR Meter IM3536: DC and 4 Hz to 8 MHz, ±0.05% basic accuracy, 1 ms measurement time. Built for R&D and production lines. View full specs.

Key Capabilities

• DC, 4 Hz to 8 MHz measurement frequency
• High-speed measurement of 1 ms (fastest time)
• High-precision measurement of ±0.05% rdg. (representative value)
• Guaranteed accuracy range from 1 mΩ, low-impedance measurement with unmatched repeatability
• DC bias function: Measure under conditions simulating actual use or in accordance with industry standards
• Exceptional specifications and cost-performance for a wide range of applications, from R&D to production lines

Contact RCC Electronics for Canadian availability, configuration guidance and a formal quotation.

Technical Specifications

Official HIOKI product information

Standard Accessories

• Power cord ×1, Instruction manual ×1

Optional accessories below are not included unless stated on the RCCE quotation.

Optional Accessories

• SMD TEST FIXTURE IM9100 — • Direct-connection testing; • Test SMDs with electrodes on the bottom; • DC to 8MHz（Can be measured up to 10 MHz, when combined with the special order model IM3536-01）; • Measurable sample sizes: Metric (Inch): 0402 (01005), 0603 (0201), 1005 (0402)
• SMD TEST FIXTURE IM9110 — • For direct connection two-wire testing; • DC to 1 MHz; • Measurable sample size: 008004 (inch)
• CONTACT TIPS IM9901
• CONTACT TIPS IM9902
• 4-TERMINAL PROBE L2000
• PINCHER PROBE L2001 — • DC to 8MHz, 50Ω termination; • Tip electrode spacing: 0.3 to 6 mm ; • Measurable sample sizes: 0201 to 2220 (inch)
• 4-TERMINAL PROBE 9140-10
• TEST FIXTURE 9261-10
• TEST FIXTURE 9262
• SMD TEST FIXTURE 9263
• DC BIAS VOLTAGE UNIT 9268-10
• DC BIAS CURRENT UNIT 9269-10
• 4-TERMINAL PROBE 9500-10
• SMD TEST FIXTURE 9677
• SMD TEST FIXTURE 9699
• GP-IB CONNECTOR CABLE 9151-02

Confirm compatibility and the final configuration with RCC Electronics before ordering.