3273-50 - HIOKI 30A DC - 50MHz Clampon CT

Wide-band current probe allows direct input to oscilloscope

Wide band: DC to 50 MHz (-3 dB) High S/N characteristic enables measuring ultra low mA-range current waveforms Connects directly to oscilloscope BNC input terminal An optional power supply is available for use with oscilloscopes that do not provide probe power

Basic specifications

Rated current	30 A (requires derating at frequency)
Frequency band width	DC to 50 MHz (-3 dB)
Rise time	=<7 ns
Noise level	2.5 mA max. (band width limited to 20 MHz)
Accuracy (DC or 45 to 66 Hz)	±1.0 % rdg. ±1 mV
Output rate	0.1 V/A
Max. circuit voltage	300 V CAT I (insulated wire)
Core jaw dia.	Ø5 mm(0.20 in)
Power supply	±12 V ±0.5 V, 5.3 VA max.,   Plug: FFA.0S.304.CNAC42Z / LEMO inc.
Dimensions, mass	175 mm(6.89 in)W × 18 mm(0.71 in)H × 40 mm(1.57 in)D, 230 g (8.1 oz), cord length: 1.5 m(4.92 ft)
Accessories	Soft case (1)

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: