MR8880-20 (Rental) - HIOKI High Speed Portable Memory Recorder, 4Ch (Kit)

High Speed Portable Memory Recorder for 4CH Analog and 8CH Digital Signals

• CAT III 600 V insulation performance; Can measure directly 480 V power line.
• 4 completely isolated channels let you simultaneously record data on a 3-phase power line plus have one extra channel
• Tough against harsh environments; Operating temperature range -10°C to 50°C
• Built to withstand mechanical shocks and vibrations (ships standard with side protectors)
• Make settings easily with PRESETS function

Basic specifications (accuracy guaranteed for 1 year)

Number of channels

4 analog channels + 8 logic channels (standard) Note: Isolated analog channels, isolated input and frame, logic has common GND

Measurement ranges
(10 div full-scale)

4 channels of voltage measurement; mode switchable between instantaneous waveform, or RMS value
10 mV to 100 V/div, 13 ranges, resolution: 1/640 of range
RMS value mode: DC, or 30 Hz to 10 kHz, Crest factor: 2

Max. rated voltage

Between terminals: 600 VAC, DC
Between terminal to earth: 600 VAC, DC CAT III, 300 VAC, DC CAT IV

Frequency characteristics

DC to 100 kHz (±3dB)

Time axis (High-speed function)

100 μs to 100 ms/div, 10 ranges, Sampling period: 1/100 of range

Recording intervals (Real-time function)

100 μs to 1 minute, 19 selections (simultaneous sampling in all channels)

Measurement functions

High-speed function (high speed recording)
Real-time function (actual time recording)

Memory capacity

14-bits × 1M-Words/ch (1 word = 2 bytes)

Removable storage

CF Card slot × 1, USB 2.0 memory × 1, (Up to 2 GB)

Printing

[Printer unit is option] 112 mm (4.41 in) × 18 m (59.06 ft), thermal paper roll, Recording speed : 10 mm (0.39 in)/sec
Note: Printing is not supported when using alkaline batteries

Display

5.7-inch VGA-TFT color LCD (640 × 480 dots)

Displayable languages

English, Japanese

Communication interfaces

USB 2.0 mini-B receptacle × 1; Transfers files from the installed CF card or USB memory stick to a PC when connected, and External PC control

Power supply

AC ADAPTER Z1002: 100 to 240 VAC (50/60 Hz), 11 VA (when Real-time recording) , 40 VA (when Real-time recording and printing)
BATTERY PACK Z1000: AC adapter has priority when used in combination with battery pack, recharge with AC adapter 3 hours, Continuous use 3 hours (at back-light ON)
LR6 (AA) alkaline batteries × 8, Continuous use 40 minutes, (with back-light ON, cannot be used with the PRINTER UNIT)
DC power supply: 10 to 28 VDC (cable available by special order)

Dimensions, mass

205 mm (8.07 in) W × 199 mm (7.83 in) H × 67 mm (2.64 in) D, 1.76 kg (62.1 oz) (with the BATTERY PACK installed)
When printer is combined - with main unit: 303 mm (11.93 in) W × 199 mm (7.83 in) H × 67 mm (2.64 in) D, 2.26 kg (79.7 oz) (with the BATTERY PACK installed)

Supplied accessories

Instruction Manual × 1, AC ADAPTER Z1002 × 1, Alkaline battery box × 1, Strap × 1, USB cable × 1, Application Disk (Wave Viewer Wv, Communication Commands table) × 1