MR8903 - HIOKI 4 Channel Strain Module (MR8875)
|
All products ship from Toronto, Canada by courier. Shipping is usually 1-10 days depending on your location in Canada. Shipping is free of charge. Orders received before 2:00pm (Mon-Fri) will be shipped on the same day (provided item is available in stock). You can pay with all major credit cards. On our side, we use PayPal to process all credit card transactions. But on your side, it will be like any regular purchase. You do not need to create a PayPal account. From the shopping cart, simply select "PayPal / Credit Card", then select "Pay with a credit or Visa debit card". Customer satisfaction guaranteed, or your money back. RCC Electronics is proudly Canadian. We have been selling the best test equipment since 1978. |
Measure acceleration, load, pressure or strain waveforms
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
| Functions | No. of channels: 4, for voltage/strain measurements (selectable for each channel, electronic auto-balancing, balance adjustment range within ±10000 μV, ±10000 με) |
|---|---|
| Input connectors |
Unit side: “HDR-EC14LFDTG2-SLE+” made by Honda Tsushin Kogyo Co., Ltd. Japan Via conversion cable, “PRC03-12A10-7M10.5” made by Tajimi Electronics Co., Ltd. Japan Max. rated voltage to earth: 30 V ACrms or 60 V DC (with input isolated from the main unit, the max. voltage that can be applied between input channel and chassis and between input channels without damage) |
| Suitable transducer | Strain gauge converter, Bridge resistance: 120 Ω to 1 kΩ, Bridge voltage: 2 V ±0.05 V, Gauge rate: 2.0 |
| Input resistance | More than 1 MΩ |
| Voltage measurement ranges |
50 μV to 1000 μV/div, 5 ranges, full scale: 20 division Accuracy: ±0.5 % f.s. + 4 μV (at 50 μV/div only), other ranges ±0.5 % f.s. (after auto-balance, with filter 5 Hz, zero position accuracy included) |
| Strain measurement ranges |
20 με to 1000 με/div, 6 ranges, full scale: 20 division Accuracy: ±0.5 % f.s. + 4 με (at 20, 50 με/div), other ranges ±0.5 % f.s. (after auto-balance, with filter 5 Hz, zero position accuracy included) |
| Low-pass filter | Low-pass filter: 5/10/100 Hz, 1 kHz, OFF |
| Resolution | 1/1250 of measurement range (using 16-bit A/D converter) |
| Highest sampling rate | 200 kS/s (simultaneous sampling across 4 channels) |
| Frequency characteristics | DC to 20 kHz +1/-3 dB |
| Max. allowable input | 10 V DC (the max. voltage that can be applied across input pins without damage) |
| Dimensions and mass | 119.5 mm (4.70 in)W × 18.8 mm (0.74 in)H × 151.5mm (5.96 in)D, 173 g (6.1 oz)Conversion cable ×2 (Connector: TAJIMI PRC03-12A10-7M10.5) |
| Accessories | Conversion cable ×2 (Connector: TAJIMI PRC03-12A10-7M10.5) |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: