Home » Brand: HIOKI » Current Sensor » 3276 - HIOKI 30A DC - 100MHz Clampon CT

3276 - HIOKI 30A DC - 100MHz Clampon CT

Pre-Order 3276 - HIOKI 30A DC - 100MHz Clampon CT
Click Image for Gallery
3276 - HIOKI 30A DC - 100MHz Clampon CT 3276 - HIOKI 30A DC - 100MHz Clampon CT
Brand: HIOKI
Product Code: 3276
Availability: Pre-order item. Add item to cart and ETA will be 2-4 weeks.
Specifications: Link to Data Sheet
CAD 5,773.60
Qty: Add to Cart
Add to Enquiry List Add to Compare

3276 - HIOKI 30A DC - 100MHz Clampon CT supports accurate current measurement with compatible HIOKI instruments.

Wide-band current probe allows direct input to oscilloscope
 
  • Wide band: DC to 100 MHz (-3 dB)
  • High S/N characteristic enables measuring ultra low mA-range current waveforms
  • Connects directly to oscilloscope BNC input terminal
  • Connects directly to the MEMORY HiCORDER to provide waveform monitoring
  • An optional power supply is available for use with oscilloscopes that do not provide probe power
 
Note: Connect and power up Clamp-on sensor to use in combination with the oscilloscope, or the MEMORY HiCORDER
 
 
 
Basic specifications (accuracy guaranteed for 1 year)
 
Frequency band width DC to 100 MHz (-3 dB)
Rise time =<3.5 ns
Noise level 2.5 mA rms max. (band width limited to 20 MHz)
Continuous allowable input 30 A rms (requires derating at frequency)
Max. allowable peak input 50 A peak (non continuous)
Amplitude accuracy ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 30 A rms)
±2 % rdg. (DC, 45 to 66 Hz, 30 A to 50 A peak)
Output rate 0.1 V/A (use with a device having a 1 M-ohm input resistance or higher)
Max. rated voltage to earth 300 V CAT I (insulated wire)
Core jaw dia. φ 5 mm(0.20 in)
Power supply ±12 V ±0.5 V, 5.3 VA
Dimensions, mass 175 mm (6.89 in)W × 18 mm (0.71 in)H × 40 mm (1.57 in)D, 240 g (8.5 oz), Sensor cable BNC terminal: 1.5 m (4.92 ft), Power cable: 1 m (3.28 ft),
Power plug: FFA.0S.304.CLAC42Z / LEMO inc.
Accessories Hard case × 1
 
POWER SUPPLY 3272 (Basic specifications)
 
Compatible models Model 3273-50, 3274, 3275 or 3276 × 1 unit. (One sensor only)
Note: May be used with up to 2 units of Model 3273 (not -50 type), and up to 2 units of Models 3273-50, 3274, 3275 or 3276 on condition that the measurement current is sufficiently low. Please check with your HIOKI distributor.
Power supply 100 V or 120/ 220/ 240 V AC (specify when ordering), 50/60 Hz 20 VA max.
Dimensions, mass 73 mm (2.87 in)W × 110 mm (4.33 in)H × 186 mm (7.32 in)D, 1.1 kg (38.8 oz)
Supplied accessories Power cord × 1, Spare fuse × 1
 
POWER SUPPLY 3269 (Basic specifications)
 
Compatible models Model 3273-50, 3274, 3275 or 3276 × 4 units
Note: Also up to 4 units for the discontinued Model 3273
Power supply 100 V to 240 V AC (free), 50/60 Hz 170 VA max.
Dimensions, mass 80 mm (3.15 in)W × 119 mm (4.69 in)H × 200 mm (7.87 in)D, 1.1 kg (38.8 oz)
Supplied accessories Power cord × 1
 
Continuous allowable input (requires derating at frequency)
 
 
 
Frequency [Hz]

 

Need help selecting the right HIOKI configuration? Contact RCC Electronics for Canadian application support and a quotation.

Tags: HIOKI, 3276, Current Sensors, electrical test equipment