BT5525 - HIOKI BATTERY INSULATION TESTER

Name: BT5525 - HIOKI BATTERY INSULATION TESTER
Brand: HIOKI
SKU: BT5525
Price: 7718.20 CAD
Availability: OutOfStock

Pre-Order

Click Image for Gallery

Brand: HIOKI
Product Code: BT5525
Availability: Pre-order item. Add item to cart and ETA will be 2-4 weeks.

CAD 7,718.20

Qty: Add to Cart

Add to Enquiry List Add to Compare

Description

BT5525 - HIOKI BATTERY INSULATION TESTER

For Motor and Inverter Efficiency Analysis. Multi-channel measurement applications using SiC/GaN semiconductors from automobile electrification, smart grids and reactors to renewable energy supply sources.

Key Capabilities

Ideal for battery production lines
BDD function for detecting minuscule short-circuits caused by contamination before batteries are shipped
Stable insulation resistance testing even in noisy environments
High cost performance thanks to accessible pricing, high-speed testing, and compact footprint
Contact check function reduces the number of false negatives caused by equipment issues

Contact RCC Electronics for Canadian availability, configuration guidance and a formal quotation.

Technical Specifications

Main functions	Insulation resistance test; Break Down Detect function (BDD); Contact check function
Output specifications	Output voltage : 25 V to 500 V, Setting resolution 1 V; Charging current ; (Current limit function) : 50 µA to 50 mA123, Minimum setting resolution 10 μA; Short-circuit current : 60 mA or less; Discharge current : 40 mA or greater; ; 1: Constraints involving the output generator will result in an error, making measurement impossible, if a capacitive load of approximately 50 μF or greater is connected while using a current limit setting of 5.1 mA or greater.; 2: When using a current limit setting of 5.1 mA or greater, measurement will be forcibly stopped if the output voltage is not at least 20 V at 200 ms after the start of measurement. Measurement will be possible 1 s after forcibly stopped.; 3: If the set current limit value is from 5.1 mA to 50.0 mA, the current will be limited to 5 mA after the output voltage reaches the set voltage.
Measurement specifications	Resistance value display range : 0.050 MΩ to 9999 MΩ; Resistance range : 2 MΩ, 20 MΩ, 200 MΩ, 2000 MΩ, AUTO
Basic specifications	±1.5％ rdg.±2 dgt.; 25 V ≤ V < 100 V [0.05 MΩ to 2 MΩ],; 100 V ≤ V ≤ 500 V [0.2 MΩ to 20 MΩ]
Time specifications	Test time : 0.050 s to 999.999 s, OFF; Comparator delay time : 0.001 s to 999.999 s, AUTO; Display update speed : 1 PLC; Sampling time : 1 PLC to 100 PLC
Memory functions	Panel save function : Saves up to 15 sets of measurement conditions; Measured value memory function : Saves up to 999 measured values in the instrument's internal memory
Judgment functions	Test modes : Continuous test, PASS STOP, FAIL STOP; Comparator function : ; UPPER_FAIL : Measured value > upper limit value; PASS : Upper limit value ≥ measured value ≥ lower limit value; LOWER_FAIL : Measured value < lower limit value
Various functions	Break Down Detect function (BDD) : Detecting minuscule insulation defects caused by contamination; Contact check function : 2-terminal capacitance measurement method; Automatic data output function : Automatic output of measurement results via communication interface after completion of test; Command monitor function : Screen display of commands being sent and received; External I/O monitor function : Screen display of output signal ON/OFF and input signal status; Analog output function : Converts measured values to 0 to 4 V DC and outputs
Interfaces	USB, LAN, RS-232C, EXT. I/O
Power supply	100 V to 240 V AC
Power consumption	Approx. 20 VA4; ; 4: Power supply conditions are 220 V supply voltage, 50, 60 Hz supply frequency, 200 V test voltage, 2 mA current limit, and load (1 GΩ resistor and 0.1 μF capacitor connected in parallel).
Maximum rated power	100 VA
Dimensions and mass	Approx. 215 mm (8.46 in) W × 80 mm (3.15 in) H × 306.5 mm (12.07 in) D (excluding protruding parts), Approx. 2.8 kg (98.8 oz)

Official HIOKI product information

Tags: HIOKI, BT5525, Battery Testers, electrical test equipment

BT5525 - HIOKI BATTERY INSULATION TESTER

BT5525 - HIOKI BATTERY INSULATION TESTER

Key Capabilities

Technical Specifications

Standard Accessories

Optional Accessories